Complimentary UK shipping for orders over £150

The easiest way to get the right size from us is to measure a belt you already own and like the fit of. It takes about a minute, and it's more reliable than going by your trouser size.

How to measure your belt size: measure from where the leather meets the buckle to the hole you use most

What you'll need

  • A belt that fits you well
  • A tape measure or long ruler
  • A flat surface, like a table or the floor

How to measure

  1. Lay the belt out flat and straight, with the outside facing up.
  2. Find the hole you use most. It's usually easy to spot because it's the most worn or stretched one.
  3. Start the tape where the leather meets the buckle. That's the point where the strap folds around the buckle bar. Don't start from the tip of the buckle.
  4. Measure to the centre of that hole. Don't measure to the edge of the hole or to the end of the belt.
  5. Note it in inches, rounded to the nearest inch. This is your measured belt size.

Common mistakes

  • Using your trouser size. Trouser size and measured belt size aren't the same. The belt measurement usually comes out about 2" more than the trouser size, and sometimes more than that.
  • Measuring the whole length from the buckle to the tip.
  • Starting from the end of the buckle rather than from where the leather turns around it.
  • Measuring a belt that doesn't fit you any more. Use one you're comfortable in today.

How we use your measurement

Made to measure belts (such as the Oak Bark Devon, Oak Bark Exmoor and Salcombe): each belt has 5 holes, 1" (2.5cm) apart. We make it so your measurement falls on the centre hole, which gives you 2" of adjustment either way.

Sized belts (such as the Dartington, Noss and Bow): these have 7 holes, 1" apart. Choose the size whose centre hole is closest to your measured size.

Size Centre hole Fits measured sizes
X Small 31" 28–34"
Small 33" 30–36"
Medium 36" 33–39"
Large 39" 36–42"
X Large 43" 40–46"

Sizes offered vary by belt, so please check the product page.

No belt to measure?

Just tell us your trouser size and we'll work from that. It's less precise, though, so if you're unsure please get in touch before ordering. Our made to measure and personalised belts are made just for you, so we can't accept them back for exchange or return. Getting the size right first time really matters.

For more detail, including how to measure around your waist, see our full guide: Your Perfect Leather Belt Fit.